|B1306 Landmark Plaza No.1238 Hongxing Road JiaXing , ZheJiang , China firstname.lastname@example.org|
|Place of Origin:||CN|
|Model Number:||1/4"-2" M2-M12|
|Minimum Order Quantity:||900 kg|
|Packaging Details:||Common export packing. Cartons+Pallets, or customized packing. Bag Packing|
|Delivery Time:||10-20 days|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
|Supply Ability:||500 tons per month|
|Product:||Nylon Lock Hex Head Nut||Head Drive:||Hex With Nylon Washer Insert|
|Grade:||SS304 SS316 Carbon Steel||Head:||Hex Head|
|Torque:||As Standard||Material:||Stainless Steel|
|Inspection:||100%QC Steps Inspect Before Shipment||Connection:||Common Nut|
Carbon Steel Nuts,
Hex Flange Nuts
Stainless Steel DIN985 DIN982 ISO7040 M2-M12 1/4"-2" or Customize Nylock Nut Nylon Lock Hex Head Nut
A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon washer insert that resists turning. The nylon insert has many kinds of material and production process.
The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 °F (121 °
The first is to use two same nuts on the bolt, attaching nuts a tightening torque between two, so that the bolt connection is reliable.
The second is dedicated locknut, and need a way to lock washer together. Dedicated locknut not hex nuts, but in a round nut, the nut circumference opened a three, four, six or eight notch (depending on the nut size and manufacturer product line varies), which tighten the focus of both a few notches tight tool, but also snaps into place lockwashers bayonet.
The third is on the outer surface of the nut to the inner circumferential surface of the threaded screw holes drilled therethrough (typically two, distributed in the outer-section 90) for screwing the small-diameter countersunk screws, the purpose is to thread applying a radial direction of force to prevent the lock nut loosened. At present quality on the market in a better lock nut inner peripheral surface of the nut encrusted consistent with the lock nut threaded brass pieces, to avoid radial top screws directly contacts the locking threads and damaged By. This rotational movement of the locking nut locking shaft-type parts of the case gradually began to use, such as a ball screw mounting end bearing locking.
|Item||Stainless Steel DIN985 DIN982 ISO7040 M2-M12 1/4"-2" or Customize Nylock Nut Nylon Lock Hex Head Nut|
|Material Available||1. Steel:C45(K1045), C46(K1046),C20
2. Stainless Steel: SUS201, SUS303, SUS304, SUS410, SUS420
|Surface treatment||Zinc plated, NI-platd, passivate, Chrome plated, Electro plating, Black, Plain|
|Heat treatment||Tempering, Hardening, Spheroidizing, Stress Relieving.|
|Packing||carton box + pallet|
|Lead time||Mass production 15-20 days. Reality time is according to customer's requirement|
|Technical Delivery Conditions (FOR DIN NUT ONLY)|
|Material||Steel||Stainless steel||Non-ferrous metal|
|General requirements||As specified in DIN 267 part 1|
|Standard||DIN13 Part 12 & 15|
M3-M39:6, 8, 10
|Standard||ISO 267 Part 4||DIN267 Part 11||DIN267 Part 18|
|A for product up to size M24 and L≤10d or 150mm
B for product exceeding size M24 or L>10d or 150mm
|Standard||ISO 4759 Part 1|
|Acceptance inspection||DIN267 Part 5 shall apply with regard to acceptance inspection
Hex Head Lock Nut is a kind of nut, which is mainly used for fastener one thing by the nuts. And it has requirement of the torque, and we will control the torque for customers.
Relying nylon washers to play a role in the locking, which is called nylon lock nuts. Commonly they are referred to in the industry "Nepalese cap". Mainly with threaded screw or bolt connection with the use, after locking nylon ring will be deformed, connecting both ends of the member to fill the gap, and thus play a role in locking.
1. Over 6 years of manufactiring experience
2. Well equiped with complete facilities
3. High quality with competitive price
4. Strict quality control systemSample available
5. Professional Workers
6. OEM workable
Contact Person: Liz